I have a Toshiba 4015cds laptop, still running Windows 95, and I'm trying to update my WinSPM to version 7.0. However I'm stuck at the version 4 to version 5 upgrade. The installation program says it does not see version 4.0 and won't complete the upgrade to 5.0. Version 4 works fine, its just in the upgrade that I have the problem. Any ideas (or answers)? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
WinSPM
- Thread starter oldclyde
- Start date
bigheas537
IS-IT--Management
I just went through this tonight. I started from winspm 2 which came with the system. I then applied all patches and installs as listed on the support site. When I got to the 4to5 upgrade, I had to accept the new directory that spm wanted to install to. The conversion fails if you install the v5 software to the same directory as the previous version. If I remember correctly, the conversion from 4to5 is when the application changes from Lucent to Avaya. Hope this helps.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question