Until last Friday, I was able to connect to my Magix system through winspm through a modem connected to a port on a 016 T/R card. For some reason, it doesn't seem to work now. You can here the modem dial and seemingly connect. Then it prompts you for the password (so far, so good). Once you enter the password and hit enter, winspm hangs. The activity "lights" (next to the abort button) don't flash and you can't press the abort button. I've let it sit there for hours, and it never unlocks. Any ideas of things to try?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
WinSPM connection issues?
- Thread starter onblur
- Start date
tdaugirdas
Technical User
Your other alternative is to connect directly to the processor through the "admin" port - but you need a 355 AF adapter and then a DB9 to DB25 converter. In WinSPM you have the cjoice to connect either way.
TravelingTom
Vendor
Reset the modem and then the next time you enter the password do not press enter. Click on OK. The system sees the "enter" as another character in the password.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question