Has anyone had problems installing Novell's Client32 on a machine with WinME? I've tried a couple of different versions of Client32 and always get errors on restart after the install. I've seen some postings on Novell's forums, but wondered if anyone here had similar problems and/or fixes...
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
WinME and Novell
- Thread starter Visitor
- Start date
- Thread starter
- #2
- Thread starter
- #4
It was strange - during the Client32 install, a 'New Hardware Found' window would pop up in the background and try to find drivers (which it would not). After restarting, an error would pop up where the Novell login normally would be - something about NWRedir and VLM errors, network settings will be disabled. Then if I tried to uninstall Client32, I would get blue screens after restarting. Turns out it has something to do with DUN - some people on Novell's forums said to make sure it is installed (mine was installed from Dell). So I decided to completely remove DUN and then rerun the Client32 install (after another system restore). That seemed to do it - no errors on restart and can login fine ever since. Hope this info helps, spent a lot of time trying to figure this one out....
- Status
Similar threads
- Locked
- Question
- Locked
- Question
