I have just upgraded a single server running Win2K Sp2 from
Metaframe 1.8 to Metaframe XPa FR2
I ran ok for about 4 hrs and then slowed down. Users were
having problems logging on, sometimes it would timeout other times they could get in.
Found winlogon.exe was using a lot of processor 80-90%. We
are also having printing problems which is related to the
Print spooler loging eventid 7031 "Print Spooler service terminated unexpectedly"
I have seen some fixes relating to HP printers however the
client mostly runs Brother HL1440 printers.
The Customer is in a remote location and I am trying to get
some ideas to take with me on my road trip. Any suggestions
will be greatfully accepted
Metaframe 1.8 to Metaframe XPa FR2
I ran ok for about 4 hrs and then slowed down. Users were
having problems logging on, sometimes it would timeout other times they could get in.
Found winlogon.exe was using a lot of processor 80-90%. We
are also having printing problems which is related to the
Print spooler loging eventid 7031 "Print Spooler service terminated unexpectedly"
I have seen some fixes relating to HP printers however the
client mostly runs Brother HL1440 printers.
The Customer is in a remote location and I am trying to get
some ideas to take with me on my road trip. Any suggestions
will be greatfully accepted