Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

WINFIOL TERMINAL BUSY FOR A LONG TIME

Status
Not open for further replies.

maxmant

IS-IT--Management
Aug 16, 2012
1
IT
Good Morning,
I'm newest and I have a problems with WINFIOL v. 6.4 console . I'm working on MD110. I run PCREGEN data.cmd script. The last command sent, put the Winfiol console in pause. I resume the last line of command, after that the console has been freezed. I try to "break" and "reconnect" the terminal after one day. The messages that I receive in TTY mode and Connected status was "TERMINAL BUSY". I try to switch the serial port on IPU to manage the serial line but nothing was change. I remove the IPU card for more than 10 minutes, nothing appened. I try to install WINFIOL program into another PC, nothing appened. I have only a IPU card and I cannot manage my MD110, someone can help me. Thanks Massimo
 
Dear Maxmant!
You try to use other Winfiol ( example: old winfiol )
I used Winfiol v.6.4 but commands are syntax error (old winfiol is ok)
Best regard!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top