Winfiol Log in Problem

[Monrovia]

Hi dears

This is another different kind of problem i am facing.

I have around 7 user ids created in my system. all of them log in to the system through network-IP. Some of them are in different countries too. Until last week, there was no problems like, anyone can log in and as many numbers of User Id can log in to the system at the same time. But since this week, only one user can log in to the system at a time. If one technician(User Id) is logged in to the system, all others who try to log in, will get "Port Closed/connection to host lost" message. And i checked with the those, no one did settings like restriction for one user at a time.

So what could be the problem?

 

[parnum]

send us ioddp; lidap; and ionpp; and tell us what ip addresses you are connecting to and we can help

best parnum

 

[whosrdaddy]

Sometimes it happens that telnet sessions are not released on the NIU. do RFBOI:BPOS=<position of NIU board>; and all session should work again. please post the revision of the NIU board with CNBIP:BPOS=<position of NIU board>;

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Monrovia]

Hi Parnum,

Here are the details

I am using IP - 10.172.179.30,23. License is COMPLETELY OPEN. No restriction at all for anything in my system.
[tt]
<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 MASTER FUJITSU IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN CIL-2 001-0-60-2 - OUT IN SERVICE
SYSN CIL 001-0-60-3 - OUT IN SERVICE
SYSN TELNET1 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET2 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET3 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET4 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET5 001-0-60-4 - NETWORK/MML - 7
NODE2 - 001-1-60 - - IN SERVICE
NODE2 ONEBOX 001-1-60-2 - OUT IN SERVICE
END

<IONPP;
NETWORK PORT CONFIGURATION DATA
EQU IP GATE MASK ETHERNET
001-0-60-4 10.172.179.30 10.172.179.20 255.255.254.0 00.80.37.8E.29.D6
END
[/tt]

Daddy,

I couldnt restart the NIU board. I gave command RFBOI:BPOS=1-0-60; Y; but after some time, nothing happened and when i checked, The connection has lost

Here is the details about NIU

[tt]
<CNBIP:BPOS=1-0-60;

DEVICE BOARD REVISION INFORMATION
DATE: 03AUG08 TIME: 08:46:15

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

001-0-60 NIU ROF 137 5396/2 R2A
CAA 1580021 R2A EXE
CAA 1580001 R13A OLD [/tt]

 

[Monrovia]

Sorry daddy,

yes. the board has been restarted and all 5 telnet ports can log in simultaneously

 

[whosrdaddy]

after restarting the NIU board it is normal you lose connection to it when you issue the command from that board.

the CNBIP tells me you are running an OLD firmware. update to R10A and your problem will never return...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[drewMk2]

can you actually ping the IP address???
what happens if you do a trace route???

"There is no place like 127.0.0.1

 

[whosrdaddy]

DrewMk2, the problem is already solved?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Monrovia]

Yes the problem is solved!

thanks a lot daddy

thanks parnum & drewmk for their usual support

 

[asuvp]

Is it a NIU/1 or 2?
The old firmware CAA 1580001 is for NIU/1,
and the new CAA 1580021 is for NIU/2.

[tt]
001-0-60 NIU ROF 137 5396/2 R2A
CAA 1580021 R2A EXE
CAA 1580001 R13A OLD
[/tt]

 

[whosrdaddy]

asuvp: you see that CAA 1580021/R2 is currently active on the board. concerning the NIU firmwares, they are not that different, the /1 firmware contains the scsi interface block whereas the /2 firmware has the ATA interface block, the rest of the firmware is equal...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Monrovia]

asuvp, the card is NIU2. the ROF itself showing it is NIU2

001-0-60 NIU ROF 137 5396/2 R2A

Using ATA interface.