WinFiol and "how to keep logged in" 2

[doktor]

Dear All

During our technical training the students complaining about the need to login again and again.
There could be an ASPAC for this but, it would be best to know if some of you use WinFiol, and know how to trig on e.g. TIME OUT WARNING.
When TIME OUT WARNING is seen on the PC screen, then the WinFiol program should send a CADAP; or similiar, to keep one logged on.
But how is this set up in WinFiol?
I do not want to use the ASPAC possibility, if it exists - due to security.
Thanks - in advance.

///doktor

 

[parnum]

I do not have winfiol in front of me but if i remember this is via F11 traffic setup, you enter the text of the 'error' TIME OUT WARNING and put in the parameter to enter ;

this sends ; when TIME OUT WARNING is generated - but of course when logged on remotely means you stay connected all the time if you forget to log off

best parnum

 

[whosrdaddy]

complete setup:

Open Winfiol Tools & Configuration

Select Winfiol,Plug-Ins and make sure the monitoring plug-in is enabled.

In Winfiol , select Run, Monitoring, All Channels , Text from target Exchange. in the text received: edit box, type TIME OUT WARNING. then click on the 'New Action' button and select Send Mml Command. in the MML Command edit box type ; and uncheck the Auto Connect checkbox.

Cheers,
Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[doktor]

Hi you - "2"

Thank you!
I will investigate this immediately & return with a status!

///doktor

 

[doktor]

Ten-four! It works... Some stars have been handed out!

///doktor

 

[Monrovia]

wow!
that is a very good information. let me too try this.
cheers!

 

[benaja75]

Thanks guys.
Very usefull for me