Windows(NT) unable to see Hard Drive

[enbw]

Good morning,

I have installed an additional scsi hd. The bios sees the drive but windows cannot see at all. Have run disk administrator and no luck, and not showing up in the scsi adapters etc.

Thanks for the advice in advance.

Regards

 

[Sohni]

I remember that in the old days SCSI disks had to be low level formatted before they could be taken into use (partitions created). Nowadays low level formatting is done in the factory, but you never know...

You can read this site

http://www.ameriwebs.net/groupworks/george/llf.htm