Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Windows 98 locks up when trying to print
- Thread starter theboo
- Start date
Guest_imported
New member
- Jan 1, 1970
- 0
After installation, does the test page print out ok? Does the HP printer installation give you any error messages? Can you print from DOS? Try checking the HP site for an updated driver.
Good luck!
ROGER - GØAOZ.
Good luck!
ROGER - GØAOZ.
Latest driver (as of 10-1) does some wierd stuff on 98SE. May have been machine, but I had better luck with an older driver. Just be aware that there might be a problem there. Ed Fair
efair@atlnet.com
Any advice I give is my best judgement based on my interpretation of the facts you supply.
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
efair@atlnet.com
Any advice I give is my best judgement based on my interpretation of the facts you supply.
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
- Status
Similar threads
- Locked
- Question
- Locked
- Question