I just put together a 1.2ghz pc with a IWill KA266 motherboard. My first problem was that when I went to install Windows 98 it gets to setting up hardware drivers and hits about 14 minutes remaining and locks up. If I reboot it finishes. I got everything setup but I had problems getting it to recognize my workgroup. I finally got that working. The next day I start it up and its not seeing the network again. TCP/IP is setup as it was/should be and IPX is installed and both are bindind to my NIC. Client for networks is also installed. The NIC is a LinkSys 10/100. Does anyone have ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Windows 98 does not recognize Workgroup
- Thread starter ss702cs
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question