windows 2003 doesnt see hard drive

[rkmorrow]

I have an ibm server that has a RAID 5 array set up on it.

I am trying to install 2003 server, but after windows files are installed and you move to the next part of the set up,
Windows says it cannot find a hard drive to install to.
The drive has been initialized and the logical drive looks fine.
The drive looks like it wants to synchronize and it completed, but windows does not see the logical drive to create the install partition.
any thought would be appreciated

 

[Davetoo]

When you're setting it up, it should ask to press F6 to load drivers, you need to do that and provide the drivers for your controller.

I'm Certifiable, not certified.
It just means my answers are from experience, not a book.

 

[Petje]

You can also try to use the IBM ServerGuide cd to install Windows 2003.

All required Windows 2003 drivers will be loaded...

Latest version can be downloaded here :

http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4ZKPPT

Petje
A+, MCP, MCSE on NT4.0 and windows 2000 and Windows server 2003 and CCEA