I have an IBM 300pl with Win2000. I've added a PYRO 1394 DV capture card that insists on having the same IRQ as the video card. When I try to force a change in device manager, the box is not highlited. I have Admin rights to the system but I still can't make changes.<br><br>Suggestions?<br><br>Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Windows 2000 Device Steering - Change conflicting IRQs
- Thread starter picag
- Start date
I am assuming the card is PCI and if so you would need to modify your Bios settings to reflect which IRQ you want assigned from the PCI pool to a particular slot. Assign the appropriate interrupt to the slot with the 1394 card.<br> <p>Doug<br><a href=mailto:dxd_2000@yahoo.com>dxd_2000@yahoo.com</a><br><a href= > </a><br>
- Status
Similar threads
