Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Windows 10 EDC Install

Status
Not open for further replies.

balloon172

IS-IT--Management
Jun 9, 2009
94
US
I'm having a hard time getting EDC 14.1.20 to install on Windows 10. I installed AM 6.7.70 from the .iso, which installed EDC 6.7.xx (which runs normally); when I try to update it to 14.1.20, the update errors out (debout below.)

Feb 16 11:08:20 Aloha Update Status...Started C:\Users\aloha\Desktop\AlohaEDC14.1.20.exe
Feb 16 11:08:20 Aloha Update Info...Iberdir variable defined as "D:\BootDrv\Aloha"
Feb 16 11:08:20 Aloha Update Info...Extracting file Radiant.Update.Application.AlohaUpdateConfigurationForm.resources
Feb 16 11:08:20 Aloha Update Info...Extracting file Radiant.Update.Application.AlohaUpdateProcessForm.resources
Feb 16 11:08:20 Aloha Update Info...Extracting file Radiant.Update.Application.DeboutMessageBox.resources
Feb 16 11:08:20 Aloha Update Info...Extracting file Radiant.Update.Application.Properties.Resources.resources
Feb 16 11:08:20 Aloha Update Info...Extracting file Radiant.Update.Application.CFCMessageBox.resources
Feb 16 11:08:20 Aloha Update Info...Extracting file Radiant.Update.Application.RebootForm.resources
Feb 16 11:08:20 Aloha Update Info...Extracting file Radiant.Update.Aloha.Utility.FilePattern.resources
Feb 16 11:08:20 Aloha Update Info...Extracting file EmbeddedFiles.UpdatePatch.rtp
Feb 16 11:08:20 Aloha Update Info...Extracting file EmbeddedFiles.AlohaUpdateLaunchService.exe
Feb 16 11:08:20 Aloha Update Info...Extracting file EmbeddedFiles.Radiant.Update.Configuration.dll.config
Feb 16 11:08:20 Aloha Update Info...Extracting file EmbeddedFiles.RadiantAlohaHaspExt.dll
Feb 16 11:08:20 Aloha Update Info...Extracting file Radiant.Update.Patch.ThirdParty.patchw32.dll
Feb 16 11:08:20 Aloha Update Info...Extracting file Radiant.Update.Patch.ThirdParty.patchw64.dll
Feb 16 11:08:20 Aloha Update Info...Aloha Update Version: 15.1.25.0
Feb 16 11:08:20 Aloha Update Info...[ValidateDigitalSignature] START: Digital Signature Validation for C:\Users\aloha\Desktop\AlohaEDC14.1.20.exe
Feb 16 11:08:20 Aloha Update Info...The Trust Provider confirms that a given file contains a valid embedded digital signature.
Feb 16 11:08:20 Aloha Update Info...[ValidateDigitalSignature] END
Feb 16 11:08:20 Aloha Update Info...configPathFile=C:\Users\aloha\Desktop\Radiant.Update.Configuration.dll.config
Feb 16 11:08:21 Aloha Update Info...Current Language Type: EN
Feb 16 11:08:21 Aloha Update Info...Current Installed Version: 6.7.70
Feb 16 11:08:21 Aloha Update Info...This process will update an Aloha POS system from version Any to version 14.1.20.
Feb 16 11:08:21 Aloha Update Info...arg = "C:\Users\aloha\Desktop\AlohaEDC14.1.20.exe"
Feb 16 11:08:21 Aloha Update Info...Displayed Configuration Screen
Feb 16 11:08:31 Aloha Update Info...[IsEDCPatchForcedToApply] This is NOT 24 Hour Operation Site.
Feb 16 11:08:31 Aloha Update Info...[IsEDCPatchForcedToApply] D:\BootDrv\Aloha\data\edcUpgradeEnable file NOT found.
Feb 16 11:08:31 Aloha Update Info...[IsEDCPatchForcedToApply] Matched : Current EDC Version=14.1.20 Target Version=14.1.20
Feb 16 11:08:31 Aloha Update Info...[IsEDCPatchForcedToApply] [highlight #FCE94F]All conditions are NOT met. AU will check if any EDC Batch file exists[/highlight].
Feb 16 11:08:31 Aloha Update Info...Rollback Allowed : Resulting EDC version is 14.1.20. POS version is 6.7.70.

The only thing unusual I see in the debout is highlighted in yellow - but this is a new, clean install, so there is no existing batch. Update throws an error saying it can't start the service, restart the machine, etc..., but EDCSvc won't start at all. Attempted a rollback but that didn't work - the service just will not start. I have tried un/reregistering, both using the batch file as well as manually. I have set EDC to run in 98/ME compatibility mode. The only thing that seems to work is un/reinstalling everything, at which point EDC 6.7.xx runs correctly.

Any ideas would be greatly appreciated... If someone has the .iso for EDC 14.1.20, I would appreciate a link to that - maybe that is the answer?

Thank you!

bt
 
Update...

I have found that I am able to update to 7.0.34, but not to 14.1.20 from there. Same problem - EDCSVR doesn't respond to the start request in a timely fashion...

Thanks!

bt
 
in win10 enable older .net from programs and enable there
Also install vcredirect 2012
See debout.set on root of c for what is missing

AlohaRoss
An Aloha POS 3rd Party support Solution company.
reddit : rossabout
 
Once again, Ross - spot on! .net 3.5 not active - turned it on - working now!

Thank you, sir - I appreciate it!

bt
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top