willone C LAN board on a S8700 handle multiple servers

[xharryooo]

we have a S8700 and currently use eCas call accounting software using a C LAN. We are putting a new server on our network, VX Tracker call accounting & would like to know if we can use the same C LAN Board for data on multiple servers. If so how is this done thanks.

 

[lopes1211]

change node-name ip" to add the 2nd server

"Change system cdr" to add the 2nd output.

The 1st cdr output has a lot more options than the 2nd so you may have an issue if you need to use "expanded" for both. What is your current primary output format?

-CL

 

[xharryooo]

the Primary Output Format is set to "unfomatted

 

[lopes1211]

Well the 2nd output supports unformatted too so you wont have any issues. If your new server requires "expanded", you'll just have to move the existing server to output2 and setup the new one on output1.

-CL

 

[xharryooo]

thanks

 

[PBXTech]

they use the single NIC on the primary S8300/G700 for connectivity for all the IP Phones (300+), 7 remote LSPs (S8300/G700), VX Tracker and TASKE via an AES server where i'm at now. no congestion issues that i've seen.