I manage a network of about 30 users running on Server 2000. We currently use dsl..the dsl modem plugs directly into the switch. We recently added 2 T1s. I was wondering if I could use both the dsl and T1 at the same time for combined bandwidth. Also I'm having problems getting the T1 to work. I installed a cheap router for the T1. If i plug a computer directly to the router...everything works fine. If i plug the signal from the router to the switch...the Internet does not work (well I got it to work on only one computer which is really weird)????
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Will T1 work with DSL???
- Thread starter matrixx1
- Start date
It is theoretically possible to loadshare across multiple, diverse links, but you will probably not be using your "cheap router" to do it. Most reputable routers, like even a low-end Cisco should work.
Probably the reason that you have problems when you connect the T-1s to your existing network is a routing issue. Are you defining the correct default routes when you connect the T-1s, or not changing anything?
pansophic
Probably the reason that you have problems when you connect the T-1s to your existing network is a routing issue. Are you defining the correct default routes when you connect the T-1s, or not changing anything?
pansophic
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question