Will a BCM450 pass caller ID to an

[Tfree]

Will a BCM450 pass caller ID to an analog display phone connected to an ATA?

 

[curlycord]

No sorry.


________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[Tfree]

Ok, thanks, curlycord.

 

[allworxguy]

You need a GASM8 MBC in the BCM.

Marv ccna

 

[Firebird Scrambler]

I've never known any supported display analogue phone to be able to receive CLID on a Norstar or BCM system.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

 

[curlycord]

I had always thought it worked on the BCM50 only, I know it works on the built-in ports or on expansion with GASM8 or ASM8+
Probably a silly thought that it does not work on a 450 come to think of it but I just couldn't find a doc way back that states it works on a 450 but it stated it did on a 50.....a mutual 50/450 overview.

It would make sense that it should work on a 450 too.


________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[Firebird Scrambler]

If it does work, then what analogue display phones are compatible please?.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

 

[curlycord]

Any analog phone that supports CLID in general.



________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[exsmogger]

On a BCM50 I know the built-in analog stations pass CLID as I use this on my system. I've never known an ATA to pass CLID to analog devices. You'll need a GASM8 as stated above.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952