Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

WIFI for Users

Status
Not open for further replies.

johnnyBravo1

IS-IT--Management
Mar 16, 2004
60
US
Here is what i'd like to accomplish? Provide our waiting patients with wireless Internet access in the waiting room without them having any access to our confidential files or Server. We have one Internet Connection where everyone including the staff acccesses the interenet. What is the best way to set this type of solution up.
 
Way more informatoin needed. But, if you are using small office gear, buy 2 new routers and set connect each of them to your internet router. To 1 router connect your office staff and configure the other for your guest wireless access. Configure each to route to the internet. There is somewhat more to it than this but is the idea.
 
l was configuration my Linksys WRT54G router and l enabled WPA2 but entered more than 13 ascii characters. Since then none of the PCs both wireless and cable are able to connect to the router. Initially the laptop is able to detect the rouetr but it wont authenticate. Now l cannot even have access the setup page for the router when l enter the IP address. Please l need help and its urgent.

Welolo
 
Try a wired connection to the router. This should get you in, and then you can adjust or knock out the WPA2 settings as appropriate. If a wired connection doesn't work either, then your only option is a total reset of the router.

ROGER - G0AOZ.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top