Hi there,
a company has just setup a wireless connection for us. The setup is as following:
The distance between objects is 1.5km, there is one building between the two buidlings that is 5 meters higher:
Object "A" a "Redline AN-50", whitch operates on 5.4Ghz, 36Mb/s and setup as accesspoint.
Object "B1" a Redline (same device) but setup as a repeater.
Object "B2" a Cisco Aironet 350, 2.4Ghz. 11Mb/s setup as repeater.
Object "C" the same Aironet setup as AP.
The ping results are good, 9ms peeks to 32ms. But when testing the speed by copying a large file from a fileserver, the download started at 30KB/s and then dropped to 8KB/s.
Could there be a misconfiguration of the hardware, or what is the problem here. If someone can hint me, please.
a company has just setup a wireless connection for us. The setup is as following:
The distance between objects is 1.5km, there is one building between the two buidlings that is 5 meters higher:
Object "A" a "Redline AN-50", whitch operates on 5.4Ghz, 36Mb/s and setup as accesspoint.
Object "B1" a Redline (same device) but setup as a repeater.
Object "B2" a Cisco Aironet 350, 2.4Ghz. 11Mb/s setup as repeater.
Object "C" the same Aironet setup as AP.
The ping results are good, 9ms peeks to 32ms. But when testing the speed by copying a large file from a fileserver, the download started at 30KB/s and then dropped to 8KB/s.
Could there be a misconfiguration of the hardware, or what is the problem here. If someone can hint me, please.