Why happens that?

[Petazetas754]

Hi, sorry for my English but im spanish,I have a Cisco Router 1760 and six ip-phones 7905, 1 FXO with 2 ports and 1 FXS 2 ports too.
I have all connected and i can make calls to the pstn and to my ip phones (local calls) but i cant recieve incoming calls...thats its my problem, I tried lot of things but .....someone can help me.

Heres my Router configuration:

Using 2872 out of 29688 bytes
!
! Last configuration change at 10:01:24 GMT Sat Aug 7 2004
! NVRAM config last updated at 10:01:39 GMT Sat Aug 7 2004
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Cisco1700
!
logging queue-limit 100
enable secret 5 $1$icyq$QS7ehk8Cn2S2KzEqNn2OG1
enable password telematica
!
clock timezone GMT 1
ip subnet-zero
!
!
!
!
isdn switch-type basic-net3
!
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
interface FastEthernet0/0
ip address 128.100.110.40 255.255.255.0
speed auto
half-duplex
!
interface BRI0/0
no ip address
isdn switch-type basic-net3
isdn incoming-voice voice
isdn sending-complete
!
interface Serial1/0
no ip address
shutdown
!
interface Serial1/1
no ip address
shutdown
!
ip classless
ip http server
ip http path flash
!
!
!
!
tftp-server flash
tftp-server flash:
!
call application voice centralita flash:its-CISCO.2.0.1.0.tcl
call application voice centralita aa-pilot 001
call application voice centralita operator 005
call application voice centralita language 1 en
call application voice centralita set-location en 0 flash:
call rsvp-sync
!
voice-port 2/0
cptone ES
description PasarelaRTC
supervisory disconnect anytone
ring number 10
!
voice-port 2/1
!
voice-port 3/0
cptone ES
station-id number 008
!
voice-port 3/1
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
dial-peer voice 20008 pots
destination-pattern 9
port 2/0
!
dial-peer voice 20009 pots
destination-pattern 007
port 3/0
!
gateway
!
!
telephony-service
load 7905 CP79050101SCCP030530B
max-ephones 24
max-dn 120
ip source-address 128.100.110.40 port 2000
auto assign 1 to 6 type 7905 cfw 001 timeout 30
system message Red Telefonia IP Lab. Telematica
create cnf-files version-stamp 7960 Aug 07 2004 09:59:54
max-conferences 6
moh music-on-hold.au
time-format 24
dn-webedit
time-webedit
secondary-dialtone 9
!
!
ephone-dn 1 dual-line
number 001
name telematica1
!
!
ephone-dn 2 dual-line
number 002
name telematica2
!
!
ephone-dn 3 dual-line
number 003
name telematica3
!
!
ephone-dn 4 dual-line
number 004
name telematica4
!
!
ephone-dn 5 dual-line
number 005
name telematica 5
!
!
ephone-dn 6 dual-line
number 006
name telematica6
!
!
ephone 1
mac-address 000D.EDAB.653A
type 7905
button 1:1
!
!
!
ephone 2
mac-address 000E.386E.DD9B
type 7905
button 1:2
!
!
!
ephone 3
mac-address 000D.EDAB.6327
type 7905
button 1:3
!
!
!
ephone 4
mac-address 000E.386D.D29B
type 7905
button 1:4
!
!
!
ephone 5
mac-address 000D.EDC3.6723
speed-dial 1 900 label "PSTN"
type 7905
button 1:5
!
!
!
ephone 6
mac-address 000D.EDAB.648C
type 7905
button 1:6
!
!
!
line con 0
speed 115200
line aux 0
line vty 0 4
password telematica
login
!
end
--------------------------------------------------------------------------------command completed.
Thank you

 

[BuckWeet]

on your POTS voice-ports you need to put a 'incoming called-number' field in there..

like 'incoming called-number 1000' or whatever your directory numbers are..

 

[Petazetas754]

Thanks BuckWeet now i going put that in my configuration a will see if works. Thanks a lot for your help!!!!!!!

 

[Petazetas754]

oh it doesnt works here is my coplete configuration
has i write correctly dial peers: ¿incoming called-number 005?

CONFIGURACION GLOBAL ROUTER


Using 2408 out of 29688 bytes
!
! Last configuration change at 20:43:17 GMT Sat Aug 21 2004
! NVRAM config last updated at 20:43:20 GMT Sat Aug 21 2004
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Cisco1700
!
logging queue-limit 100
enable secret 5 $1$oZoY$O.Bc9D2rmbOXALtZGAusz/
enable password telematica
!
clock timezone GMT 1
ip subnet-zero
!
!
!
ip dhcp pool dynamicserver
network 128.100.0.0 255.255.0.0
option 150 ip 128.100.110.40
default-router 128.100.110.40
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
interface FastEthernet0/0
ip address 128.100.110.40 255.255.0.0
speed auto
half-duplex
!
interface BRI0/0
no ip address
shutdown
!
interface Serial1/0
no ip address
shutdown
!
interface Serial1/1
no ip address
shutdown
!
ip classless
ip http server
ip http path flash
!
!
!
!
snmp-server community public RO
snmp-server enable traps tty
call rsvp-sync
!
voice-port 2/0
cptone ES
!
voice-port 2/1
!
voice-port 3/0
!
voice-port 3/1
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
dial-peer voice 1 pots
incoming called-number 005
destination-pattern 9
port 2/0
!
dial-peer voice 2 pots
destination-pattern 007
port 3/0
!
!
telephony-service
load 7905 CP79050101SCCP030530B
max-ephones 24
max-dn 120
ip source-address 128.100.110.40 port 2000
create cnf-files version-stamp 7960 Aug 21 2004 20:14:54
max-conferences 6
dn-webedit
time-webedit
!
!
ephone-dn 1 dual-line
number 001 no-reg both
name Telematica1
hold-alert 30 originator
!
!
ephone-dn 2 dual-line
number 002 no-reg both
name Telematica2
hold-alert 30 originator
!
!
ephone-dn 3 dual-line
number 003 no-reg both
name Telematica3
hold-alert 30 originator
!
!
ephone-dn 4 dual-line
number 005 no-reg both
name Telematica5
hold-alert 30 originator
!
!
ephone-dn 5 dual-line
number 006 no-reg both
name Telematica6
hold-alert 30 originator
!
!
ephone 1
mac-address 000D.EDAB.653A
button 1:1
!
!
!
ephone 2
mac-address 000D.EDC3.6723
button 1:5
!
!
!
ephone 3
mac-address 000D.EDAB.6327
button 1:3
!
!
!
ephone 4
mac-address 000E.386E.DD9B
button 1:2
!
!
!
ephone 5
mac-address 000D.EDAB.648C
button 1:4
!
!
!
line con 0
speed 115200
line aux 0
line vty 0 4
login
!
no scheduler allocate
end

command completed.



TRAZA DEL PUERTO FXO 2/0 QUE ES EL QUE USO PARA LA PSTN


Command base-URL was: /exec/-
Complete URL was: /exec/-/show/voice/trace/2\/0/detail
Command was: show voice trace 2/0 detail


2/0 Stack 0:
State Transitions: timestamp (state, event) -> (state, event) ...
14.559 (S_OPEN_PEND, E_DSP_INTERFACE_INFO) ->
14.559 (S_DOWN, E_DSP_SIG_0100) ->
14.559 (S_DOWN, E_HTSP_IF_INSERVICE) ->
14.563 (S_OPEN_PEND, E_DSP_INTERFACE_INFO) ->
14.563 (S_DOWN, E_DSP_SIG_0100) ->
14.563 (S_DOWN, E_HTSP_IF_INSERVICE) ->
14.567 (S_OPEN_PEND, E_HTSP_GO_UP) ->
Event Counts (zeros not shown): (event, count)
(E_HTSP_IF_INSERVICE, 2) E_HTSP_GO_UP, 1) E_DSP_INTERFACE_INFO, 2) E_DSP_SIG_0100, 2)

State Counts (zeros not shown): (state, count)
(S_OPEN_PEND, 3) S_DOWN, 6) :

Stack 1:
State Transitions: timestamp (state, event) -> (state, event) ...
1703.240 (FXOLS_ONHOOK, E_HTSP_SETUP_REQ) ->
1703.240 (FXOLS_WAIT_DIAL_TONE, E_HTSP_EVENT_TIMER) ->
1703.240 (FXOLS_WAIT_DIAL_DONE, E_DSP_DIALING_DONE) ->
1703.248 (FXOLS_WAIT_CUT_THRU, E_HTSP_VOICE_CUT_THROUGH) ->
1707.535 (FXOLS_OFFHOOK, E_HTSP_RELEASE_REQ) ->
1709.538 (FXOLS_GUARD_OUT, E_HTSP_EVENT_TIMER) ->
1709.538 (FXOLS_ONHOOK, E_DSP_SIG_0100) ->
2297.021 (FXOLS_ONHOOK, E_HTSP_IF_INSERVICE) ->
Event Counts (zeros not shown): (event, count)
(E_HTSP_IF_INSERVICE, 1) E_HTSP_SETUP_REQ, 1) E_HTSP_RELEASE_REQ, 1) E_HTSP_VOICE_CUT_THROUGH, 1)
(E_DSP_DIALING_DONE, 1) E_DSP_SIG_0100, 1) E_HTSP_EVENT_TIMER, 2) :
State Counts (zeros not shown): (state, count)
(FXOLS_ONHOOK, 3) FXOLS_OFFHOOK, 1) FXOLS_WAIT_DIAL_TONE, 1) FXOLS_WAIT_DIAL_DONE, 1)
(FXOLS_WAIT_CUT_THRU, 1) FXOLS_GUARD_OUT, 1) :



command completed.










RESUMEN DE PUERTOS (distintas características)

IN OUT
PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC
========= == ============ ===== ==== ======== ======== ==
2/0 -- fxo-ls up dorm idle on-hook y
2/1 -- fxo-ls up dorm idle on-hook y
3/0 -- fxs-ls up dorm on-hook idle y
3/1 -- fxs-ls up dorm on-hook idle y
50/0/1 1 efxs up dorm on-hook idle y
50/0/1 2 efxs up dorm on-hook idle y
50/0/2 1 efxs up dorm on-hook idle y
50/0/2 2 efxs up dorm on-hook idle y
50/0/3 1 efxs up dorm on-hook idle y
50/0/3 2 efxs up dorm on-hook idle y
50/0/4 1 efxs up dorm on-hook idle y
50/0/4 2 efxs up dorm on-hook idle y
50/0/5 1 efxs up dorm on-hook idle y
50/0/5 2 efxs up dorm on-hook idle y




PORT CODEC VAD VTSP STATE VPM STATE
============ ======== === ==================== ======================
2/0 - - - FXOLS_ONHOOK
2/1 - - - FXOLS_ONHOOK
3/0 - - - FXSLS_ONHOOK
3/1 - - - FXSLS_ONHOOK
50/0/1 .1 - - - EFXS_ONHOOK
50/0/1 .2 - - - EFXS_ONHOOK
50/0/2 .1 - - - EFXS_ONHOOK
50/0/2 .2 - - - EFXS_ONHOOK
50/0/3 .1 - - - EFXS_ONHOOK
50/0/3 .2 - - - EFXS_ONHOOK
50/0/4 .1 - - - EFXS_ONHOOK
50/0/4 .2 - - - EFXS_ONHOOK
50/0/5 .1 - - - EFXS_ONHOOK
50/0/5 .2 - - - EFXS_ONHOOK







50/0/x son puertos que crea el Router llamados virtuales















RESUMEN DE DIAL PEERS

dial-peer hunt 0
AD PRE PASS
TAG TYPE MIN OPER PREFIX DEST-PATTERN FER THRU SESS-TARGET PORT
20007 pots up up 001 0 50/0/1
20008 pots up up 002 0 50/0/2
20009 pots up up 003 0 50/0/3
20010 pots up up 005 0 50/0/4
20011 pots up up 006 0 50/0/5
1 pots up up 9 0 2/0
2 pots up up 007 0 3/0




RESUMEN DE TELEPHONY SERVICES ALL
Command base-URL was: /exec/-
Complete URL was: /exec/-/show/telephony-service/all
Command was: show telephony-service all


CONFIG (Version=3.0)
=====================
Cisco CallManager Express
ip source-address 128.100.110.40 port 2000
load 7905 CP79050101SCCP030530B
max-ephones 24
max-dn 120
max-conferences 6
max-redirect 5
time-format 12
date-format mm-dd-yy
keepalive 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
web admin system name Admin
web admin customer name Customer
edit DN through Web: enabled.
edit TIME through web: enabled.
Log (table parameters):
max-size: 150
retain-timer: 15
create cnf-files version-stamp 7960 Aug 21 2004 20:14:54
local directory service: enabled.


ephone-dn 1 dual-line
number 001 no-reg both
name Telematica1
preference 0 secondary 9
huntstop
no huntstop channel
hold-alert 30 originator

ephone-dn 2 dual-line
number 002 no-reg both
name Telematica2
preference 0 secondary 9
huntstop
no huntstop channel
hold-alert 30 originator

ephone-dn 3 dual-line
number 003 no-reg both
name Telematica3
preference 0 secondary 9
huntstop
no huntstop channel
hold-alert 30 originator

ephone-dn 4 dual-line
number 005 no-reg both
name Telematica5
preference 0 secondary 9
huntstop
no huntstop channel
hold-alert 30 originator

ephone-dn 5 dual-line
number 006 no-reg both
name Telematica6
preference 0 secondary 9
huntstop
no huntstop channel
hold-alert 30 originator


ephone 1
mac-address 000D.EDAB.653A
button 1:1
!
ephone 2
mac-address 000D.EDC3.6723
button 1:5
!
ephone 3
mac-address 000D.EDAB.6327
button 1:3
!
ephone 4
mac-address 000E.386E.DD9B
button 1:2
!
ephone 5
mac-address 000D.EDAB.648C
button 1:4
!


voice-port 50/0/1
station-id number 001
station-id name Telematica1
!
voice-port 50/0/2
station-id number 002
station-id name Telematica2
!
voice-port 50/0/3
station-id number 003
station-id name Telematica3
!
voice-port 50/0/4
station-id number 005
station-id name Telematica5
!
voice-port 50/0/5
station-id number 006
station-id name Telematica6
!


dial-peer voice 20007 pots
destination-pattern 001
no e164 registration
huntstop
progress_ind setup enable 3
port 50/0/1

dial-peer voice 20008 pots
destination-pattern 002
no e164 registration
huntstop
progress_ind setup enable 3
port 50/0/2

dial-peer voice 20009 pots
destination-pattern 003
no e164 registration
huntstop
progress_ind setup enable 3
port 50/0/3

dial-peer voice 20010 pots
destination-pattern 005
no e164 registration
huntstop
progress_ind setup enable 3
port 50/0/4

dial-peer voice 20011 pots
destination-pattern 006
no e164 registration
huntstop
progress_ind setup enable 3
port 50/0/5


tftp-server system:/its/SEPDEFAULT.cnf
tftp-server system:/its/SEPDEFAULT.cnf alias SEPDefault.cnf
tftp-server system:/its/XMLDefault.cnf.xml alias XMLDefault.cnf.xml
tftp-server system:/its/ATADefault.cnf.xml
tftp-server system:/its/united_states/7960-tones.xml alias United_States/7960-tones.xml
tftp-server system:/its/united_states/7960-font.xml alias English_United_States/7960-font.xml
tftp-server system:/its/united_states/7960-dictionary.xml alias English_United_States/7960-dictionary.xml
tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/7960-kate.xml
tftp-server system:/its/united_states/SCCP-dictionary.xml alias English_United_States/SCCP-dictionary.xml



command completed.

**********************************************************************
Output
Command base-URL was: /exec/-
Complete URL was: /exec/-/show/call-manager-fallback/all
Command was: show call-manager-fallback all


Call-manager fallback is not enabled

command completed.

RESUMEN TELEFONOS

PORT DN STATE MWI_STATE CODEC VAD VTSP STATE VPM STATE
======== ========== ============ ======== === ===================== =========
50/0/1 CH1 IDLE CH2 IDLE NONE - - - EFXS_ONHOOK
50/0/2 CH1 IDLE CH2 IDLE NONE - - - EFXS_ONHOOK
50/0/3 CH1 IDLE CH2 IDLE NONE - - - EFXS_ONHOOK
50/0/4 CH1 IDLE CH2 IDLE NONE - - - EFXS_ONHOOK
50/0/5 CH1 IDLE CH2 IDLE NONE - - - EFXS_ONHOOK

command completed.


ephone-1 Mac:000D.EDAB.653A TCP socket:[2] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:128.100.110.51 15966 7905 keepalive 56 max_line 2 dual-line
button 1: dn 1 number 001 CH1 IDLE CH2 IDLE


ephone-2 Mac:000D.EDC3.6723 TCP socket:[3] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:128.100.110.56 15965 7905 keepalive 56 max_line 2 dual-line
button 1: dn 5 number 006 CH1 IDLE CH2 IDLE


ephone-3 Mac:000D.EDAB.6327 TCP socket:[5] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:128.100.110.53 15966 7905 keepalive 55 max_line 2 dual-line
button 1: dn 3 number 003 CH1 IDLE CH2 IDLE


ephone-4 Mac:000E.386E.DD9B TCP socket:[1] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:128.100.110.52 15966 7905 keepalive 56 max_line 2 dual-line
button 1: dn 2 number 002 CH1 IDLE CH2 IDLE


ephone-5 Mac:000D.EDAB.648C TCP socket:[4] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:128.100.110.55 15967 7905 keepalive 56 max_line 2 dual-line
button 1: dn 4 number 005 CH1 IDLE CH2 IDLE





************************************************************************************************************************************************

 

[BuckWeet]

I goofed (I'm trying to remember from memory)

I told you the wrong command, that command was for a dial-peer..

Under the voice port you need to do "connection plar"

after the plar, put the DN after the plar statement..


BuckWeet

 

[bythespy]

Yep the PLAR statement will get you in business!

Mspivey
CCNP

Have you been to

http://www.ciptug.org

?
The OFFICIAL Cisco IP Telephony User Group!

"convergence isn't coming...... it is here." mspivey 2003

 

[Petazetas754]

Thanks a lot all .Ill try that command, and tell you if works. This is a very good technnical forum,its great, and fast....

 

[Petazetas754]

I have put connection plar but not works. Whta is exactly the command i must write connection plar 005?

I want that the PSTN only rings in telephon with number 005 and when i press 9 in some ip telephon its goes to PSTN

Have i the dial peers correctly? Can you supervisory my numbers and my destination pattern or anwers addres or incoming called number.... how do you put that?

number in my network are 001 002 003 005 006 007

number of my pstn 34942201391

thanks a lot

 

[Petazetas754]

Now port FXO 2/0 has this configuration

IN OUT
PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC
========= == ============ ===== ==== ======== ======== ==
2/0 -- fxo-ls up dorm idle on-hook y
2/1 -- fxo-ls up dorm idle on-hook y
3/0 -- fxs-ls up dorm on-hook idle y
3/1 -- fxs-ls up dorm on-hook idle y
50/0/1 1 efxs up dorm on-hook idle y
50/0/1 2 efxs up dorm on-hook idle y
50/0/2 1 efxs up dorm on-hook idle y
50/0/2 2 efxs up dorm on-hook idle y
50/0/3 1 efxs up dorm on-hook idle y
50/0/3 2 efxs up dorm on-hook idle y
50/0/4 1 efxs up dorm on-hook idle y
50/0/4 2 efxs up dorm on-hook idle y
50/0/5 1 efxs up dorm on-hook idle y
50/0/5 2 efxs up dorm on-hook idle y
--------------------------------------------------------------------------------command completed.



******************************************************************
Foreign Exchange Office EU 2/0 Slot is 0, Sub-unit is 2, Port is 0
Type of VoicePort is FXO
Operation State is DORMANT
Administrative State is UP
The Last Interface Down Failure Cause is Administrative Shutdown
Description is not set
Noise Regeneration is enabled
Non Linear Processing is enabled
Non Linear Mute is disabled
Non Linear Threshold is -21 dB
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 3 dB
Echo Cancellation is enabled
Echo Cancellation NLP mute is disabled
Echo Cancellation NLP threshold is -21 dB
Echo Cancel Coverage is set to 64 ms
Echo Cancel worst case ERL is set to 6 dB
Playout-delay Mode is set to adaptive
Playout-delay Nominal is set to 60 ms
Playout-delay Maximum is set to 200 ms
Playout-delay Minimum mode is set to default, value 40 ms
Playout-delay Fax is set to 300 ms
Connection Mode is plar opx
Connection Number is 005
Initial Time Out is set to 10 s
Interdigit Time Out is set to 10 s
Call Disconnect Time Out is set to 60 s
Ringing Time Out is set to 180 s
Wait Release Time Out is set to 30 s
Companding Type is u-law
Region Tone is set for ES

Analog Info Follows:
Currently processing none
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Impedance is set to 600r Ohm
Station name None, Station number None
Translation profile (Incoming):
Translation profile (Outgoing):

Voice card specific Info Follows:
Signal Type is loopStart
Battery-Reversal is disabled
Number Of Rings is set to 1
Supervisory Disconnect is signal
Answer Supervision is inactive
Hook Status is On Hook
Ring Detect Status is inactive
Ring Ground Status is inactive
Tip Ground Status is inactive
Dial Out Type is dtmf
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Pulse Rate Timing is set to 10 pulses/second
InterDigit Pulse Duration Timing is set to 750 ms
Percent Break of Pulse is 65 percent
GuardOut timer is 2000 ms
Minimun ring duration timer is 125 ms--------------------------------------------------------------------------------command completed.

 

[Petazetas754]

Without opx doesnt works also

connction plar 005
connection plar opx 005

Both dont work

 

[Petazetas754]

Do you think im using extension or confusing with id numbers.... Do you recommend me a dial plan map?

 

[Petazetas754]

Here is my network for facility the solution:




ip phones to the switch (numbers to call between
them)

001
0-----------------------|
0----002-------------- O----003-----------|---------------|
0----005-----------| SWITCH |--------|
0----006-----------|---------------| |
|
|------------------------| |
| ROUTER CISCO1700 | |
| | |
| fxo fxs ethernet|---|
|--|-------|---------|---|
2/0 | | |
| | |--consolePC
| |
| |
PSTN analogic-phone(007)
(+34942201391)
Here is the problem
if i dial 9 i can call to
the pstn but nobody can call me
only if i open port dialing 9,but
not automatically