Why does App goes into debug mode without any breakpoints set.

[colezpapa]

When I run my app, its going into debug mode. I cleared the breakpoints and re-booted but it still goes into debug,
Whats going on, I never saw this before.

 

[Remou]

What happens when you compile? What line is highlighted?

 

[addy]

I've had this before, if i remember rightly, one fo the variables names I had declared happened to be a 'reserved' name, it was something like Name, or User or similar.

Once I changed it to strUser all seemed well.

 

[WahTeasEWah]

I'm not sure why it happens. But it has happened to me before and here is what I do to clear it.

I set a breakpoint.
Run the code until it breaks.
Stop the code.
Remove the Breakpoint.
I run the code again and it should be gone.

Hope this helps.

 

[Hap007]

Dear colezpapa,

I have seen the same happen to me on occasion.

What I did to correct the issue was to clear all break points twice. That is twice in a row before running the app again.

Do not know why, but it seems to solve the problem for me.

Hope This Helps,
Hap...

Access Developer

http://www.fcs-software.com/fcsaccessdev.html

Access based Accounting Solutions - with free source code
Access Consultants forum

http://www.tek-tips.com/threadminder.cfm?pid=1121

 

[colezpapa]

Thanks all. I removed the breakpoint, then set a new one...and removed it again., all is ok now.