Why Digital TN's get disabled on Opc11C and not on Op81 & Op61 4

[AlbertDT]

Hi!

I have a situation, I work with Meridian Op81c, 61c and 11c. On the Op81c & Opc61 when there is a digital TN on the Outlet without a set connected dosn't get disabled, if you put a digital phone after days or weeks, it works normally but on the Op11c if you left a digital Tn without a phone connected the TN gets disabled like the next day.

It is a configuration on the PBX that make this? If yes I want to know how to make the change on the Op11c so the TN dosn't get disabled, or there is a patch for this simptom?

Thanks!

 

[allenmac]

It is a result of LD 32 being present in the midnight routine.

Here is how to remove:

>ld 17

CFN000
MEM AVAIL: (U/P): 276572 USED U P: 580195 224576 TOT: 1081343
DISK RECS AVAIL: 512
DCH AVAIL: 79 USED: 1 TOT: 80
TMDI D-CHANNELS AVAIL: 59 USED: 5 TOT: 64
AML AVAIL: 16 USED: 0 TOT: 16

REQ chg
TYPE ovly
SID
BKGD
PBXH
TODR
DROL x32 <---- Remove LD 32 from daily routine
MULTI_USER

 

[acewarlock]

Do you have LD 30 in the DROL (MIDS) in the CFN?
If you do it will Disable any unplugged digital phone when it does the MIDS.

It is not advised to remove LD 30 from the MIDS.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[AlbertDT]

Ok, this daily routine affects other stuff on the PBX apart of the TN's or it's only for the sets?

 

[allenmac]

Right on acewarlock. I thought LD 32 was the culprit. Have a star.

 

[acewarlock]

There is a CLS in the sets that you can add that stops the Disabling, but I nevere used it and I don't remember what it is.

There are other Loads in the CFN also and I don't advise removing LD 30 because it also checks othere things. I prefer LD 30 being there and disabling the set as it lets me know whats going on.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[AlbertDT]

Thanks both for the valuable information, I'll analize it and work on that.

 

[GHTROUT]

The CLS to stop TNs from disabling is FLXA

GHTROUT.com | FAQs | Recent Replies

 

[acewarlock]

Thanks Gene, have a Star on me.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.