Why are calls getting marked as E163

[Don6531]

I have two PRI's 1 from Sprint and 1 from AT&T. The Sprint PRI is getting tagged with E163 not E164 Why? See Below:

DCH Trace over Sprint PRI
DCH 7 OMSG SETUP REF 00000017 CH 86 23 TOD 9:02:54
CALLING #:4147653535 NUM PLAN: E163/NATIONAL (UNKNOWN
CALLED #:01161396694916 NUM PLAN: E163/INTERNATIONAL (UNKNOWN)
DCH 7 IMSG CALLPROC REF 00000017 CH 86 23 TOD 9:02:54

DCH 7 IMSG PROGRESS REF 00000017 CH 86 23 TOD 9:02:54
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

DCH 7 IMSG ALERT REF 00000017 CH 86 23 TOD 9:02:56
PROGRESS: INBAND INFO OR PATTERN IS AVAIL
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

DCH 7 IMSG CONNECT REF 00000017 CH 86 23 TOD 9:02:56
DCH 7 OMSG CONN ACK REF 00000017 CH 86 23 TOD 9:02:56

DCH 7 OMSG DISC REF 00000017 CH 86 23 TOD 9:03:04
CAUSE :NORMAL CALL CLEARING

DCH 7 IMSG RELEASE REF 00000017 CH 86 23 TOD 9:03:04
DCH 7 OMSG REL COMP REF 00000017 CH 86 23 TOD 9:03:04

DCH Trace over AT&T PRI
DCH 1 OMSG SETUP REF 0000005D CH 46 21 TOD 9:29:42
CALLING #:0114147653535 NUM PLAN: E164/INTERNATIONAL (UNKNOWN)
CALLED #:01161396694916 NUM PLAN: E164/INTERNATIONAL (UNKNOWN)

DCH 1 IMSG STATUS REF 0000005D CH 46 21 TOD 9:29:42
CAUSE :USER INFO DISCARDED
STATE : CALL INIT ST

DCH 1 IMSG CALLPROC REF 0000005D CH 46 21 TOD 9:29:42
DCH 1 IMSG ALERT REF 0000005E CH 46 22 TOD 9:29:42

DCH 1 IMSG ALERT REF 0000005D CH 46 21 TOD 9:29:44
DCH 1 IMSG CONNECT REF 0000005D CH 46 21 TOD 9:29:46
DCH 1 OMSG CONN ACK REF 0000005D CH 46 21 TOD 9:29:46

DCH 1 OMSG DISC REF 0000005D CH 46 21 TOD 9:29:50
CAUSE :NORMAL UNSPECIFIED

DCH 1 IMSG RELEASE REF 0000005D CH 46 21 TOD 9:29:50
DCH 1 OMSG REL COMP REF 0000005D CH 46 21 TOD 9:29:50

 

[bhassell2000]

What is your CTYP setting in your DMI??

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Don6531]

As you can see I need to inst 011 also to get the call to complete.

DMI 7
DEL 0
ISPN NO
INST 011
CTYP INTL

 

[bhassell2000]

is it built the same as the other PRI and DMI?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Don6531]

I only need the DMI when the call is marked as E163.

 

[bhassell2000]

a dmi wiht CTYP NPA will mark it E164

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Don6531]

That did not work. I changed the CTYP to NPA and still getting E163. Is E163 a Standard for 5ESS?

 

[GHTROUT]

Don, in the CLID/NET_DATA, is the INTL set to "1" rather than "011". Curious if that had any effect.

--
Nortel Resources at GHTROUT.com
--

 

[Don6531]

It's set to 011. I will change it to 1 and see.

 

[Don6531]

Changed the INTL to 1 and it changed the calling number to 1XXX-XXX-XXXX from 011-XXX-XXX-XXXX.

 

[GHTROUT]

Well, you are not alone...

thread798-1524590
thread798-1328045
thread798-1485572

--
Nortel Resources at GHTROUT.com
--