Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wht object on red background won't print...why? 2
- Thread starter lazariel
- Start date
-
2
- #2
Sounds like it's set to overprint. Select your logo, make sure Window > Attributes is selected, and deselect 'Overprint Fill' / 'Overprint Stroke'.
Overprint basically leaves the background intact and prints your logo over it. If it's black, no problem, but white is generally seen as 'no ink'. If the background is printed, and no ink printed over it, you'll just see the background. If overprint is turned off, the white logo is knocked out of the background, making it visible again.
Hope this helps!
Overprint basically leaves the background intact and prints your logo over it. If it's black, no problem, but white is generally seen as 'no ink'. If the background is printed, and no ink printed over it, you'll just see the background. If overprint is turned off, the white logo is knocked out of the background, making it visible again.
Hope this helps!
- Status
Similar threads
- Locked
- Question
- Locked
- Question