Who knows how to program a MICA card

[optionman]

I have a MICA card in my option 11 (release 3.0). Does anyone know how to program this card. My goal is to set an auto attendant up and a queue for a small group of people. The card itself does not have any flash drives plugged into it. Do I need those. I know nothing about this card so the more help the better. Thanks.

 

[johnpoole]

can you access the card via serial or http?.. once you plug into the serial you can at least set an ip addess, then from that network

http://xxx.xxx.xxx.xxx/,

that will get you to a login screen.. is this a working card? if not you need to build it in the switch as well

john poole
bellsouth business
columbia,sc

 

[optionman]

I think I may be missing a cable or something. This card does not have a serial port or ethernet port. I assume I need a cable placed where my switch tail is located with those ports. Is this correct??

 

[optionman]

How do I build the card in the switch. This is basically a digital line card right?? Do I build each TN as a digital phone. Will these be actual phone. I don't know. I can't fine any documention on this card.

 

[johnpoole]

here's the 1st station on my mica..

DES  MICA01
TN   088 1 14 00
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM  0
FDN
TGAR 1
LDN  NO
NCOS 1
SGRP 0
RNPG 0
SCI  0
SSU
XLST
SCPW
CLS  CTD FBD WTA LPR MTD FND HTA ADD HFD
     MWD LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
     POD DSX VMD CMSD SLKD CCSD SWD LND CNDA
     CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
     ICDA CDMD LLCN MCTD CLBD AUTU
     GPUD DPUD DNDA CFXD ARHD FITD CLTD ASCD
     CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
     DDGA NAMA
     DRDD EXR0
     USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN

CPND_LANG ENG
HUNT 8045501
LHK  0
PLEV 02
FCAR NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY  00 SCR 1919 0     MARP
        CPND
          NAME Mica
          XPLN 27
          DISPLAY_FMT FIRST,LAST
     01 MCN 1951 0     MARP
        CPND
          NAME Mica
          XPLN 27
          DISPLAY_FMT FIRST,LAST
     02
     03 MSB
     04 TRN
     05
     06
     07
     08
     09
     10
     11
     12
     13
     14
     15
DATE 24 MAR 2008

my set up has the same mcn for all 32 sets, the lead dn 1919 is the target for the main menu and hunts to a hgt pilot that contains the other 31 dn's..

after you build the 1st station, you should be able to dial the dn and hear a default msg and treatment

john poole
bellsouth business
columbia,sc

 

[johnpoole]

and of course how many stations you need depends on the number of lic you have for the mica... my lead number is a did since i wanted to give that dn as a published dn for patient information..

john poole
bellsouth business
columbia,sc

 

[optionman]

Thanks for the info. What about the flash cards and the cable. I need those correct??? You mentioned I need to interface the card via serial or ethernet.