which board is responsible of connecting with PSTN

[amalpbx12]

Hi guys,
Please I wanna ask a question,which board is responsible of connecting PSTN main lines to MD110 PBX.

To ALREI or not to ALREI,this is the command

 

[dstrang1]

Any board with the TLU-xx designation, with the xx being specific to the type of PSTN line (ie, analog, digital, tie, T-1/E-1, ISDN, Qsig etc.). Unless you can connect to the PSTN w/IP, then you need an IPLU.

Good luck,

Dave Strang

 

[LeeMason]

We use to use TLU-76 boards to connect to ISDN-30 (E1).


Lee Mason
Optimal Projects Ltd

http://www.opl.co.uk

http://www.backupsanywhere.com

 

[parnum]

you will need TLU76/1 (prom) for Q931/QSIG, make sure you have correct /prom on the board (do CNBIP:BPOS=x-x-x as /2 and /3 are no good for ISDN signals.

best parnum