Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Where do wires from my atx case plug into on the motherboard? 2

Status
Not open for further replies.

BrendaJC

Technical User
Jul 17, 2004
10
US
HiYa,

This looks like a great site and boy do I have a few questions, hope I can get some help answering. My motherboard is fairly old. It's a SIS K7S5A and the problem is I bought a new atx case, but am not sure where the wires go. There are 4 on each set with like a V seperating them. These are marked

red, vcc
yellow, pcr1-
green, pcr1+
black, g which I know is the ground wire

on the other set of wires they are marked the same as these above. Anyone's help I'd surely appreciate :)

 
I believe what you're describing is two usb ports built into the front of the atx case. Read the manual of the motherboard for more specifics, that will show you the placement of the extra usb connector on the motherboard and give you a pin diagram of how to properly connect those wires.
 
You may not have external USB connectors on the older board. And if you don't use USB stuff you don't need to connect them anyway.

Ed Fair
Give the wrong symptoms, get the wrong solutions.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top