Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Where Do I get newer Linux Modem Drivers???

Status
Not open for further replies.

robherc

Programmer
Apr 20, 1999
921
US
I have a Packard Bell Sound Expression Modem/Soundcard combo & I have a Leopard Win SM56 Data/Fax/Voice 56K V.90<br>
Does anyone know where I can get a *nux driver for either???<br>
<br>
<br>
-Robherc<br>
robherc@netzero.net
 
Do you need a specific driver for these? As long as they're AT compatible, they should work. Are you sure they're not WinModems? If they are, they won't work with anthing but Windows.
 
The Leopard is a Winmodem; but I don't have any idea why Caldera is refusing to configure to my other one.<br>
<br>
<br>
<br>
-robherc
 
The Leopard is a non-starter. You can only run that one under Windows :-(<br>
<br>
I've never heard of the Packard Bell, or indeed any modem/soundcard combo card before. Is it a plug-and-pray card? If so you might be able to get some useful info on it using pnptools. If they can see it :)<br>
<br>
One possible solution, if it's a PCI card, might be in you PC BIOS. Some BIOS' have a "PCI Steering" option. It allows the motherboard to allocate IRQs to PCI devices. A cloudy memory even suggests that it does this on the fly, which might be confusing Linux. Might be worth enabling/disabling this to see if it makes a difference.<br>
<br>
Just had another thought. If the card is a soundcard/modem combo card, it might be a Winmodem. It's possible that the card has a DSP chip which is controlled through software to generate sounds, or modem noise.<br>
<br>
HTH.
 
AndyBo,<br>
<br>
Packard Bell is famous for packaging their systems with these combo-cards. Then if one or the other fails, you are better off replacing it with a modem and sound card cause the disable feature is a nightmare and causes more problems. Another reason to never. _never_ buy a Packard Bell. No offense robherc, but these type of vendors are famous for packaging their systems with either cheap (cheaply made, I mean) or proprietary (see note above) components.<br>
<br>
war...<br>
robherc, this board is littered with the bodies of dead winmodems. I have posted a problem and several phone calls with viking on this board. It makes a good read.
 
war - I've got to admit, I've never been close enough to a Packard Bell to find out. Something always makes me run away when I see one :^)<br>
<br>
robherc - It sounds like it's the card, then. See if you can get hold of (buy/borrow/steal) an external modem, even if it's only 2400baud, to check that you can talk to a modem. You should find that you can, and might want to start thinking about getting hold of a new modem. My personal preference is for external modems. They tend to come with lots (or at least a coupl) of status lights on the front so you can see what is happening, and whether the modem is actually receiving any data.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top