Where can i change the number of rings to an extension

[parkgroup]

before it goes to voicemail

 

[fireeater]

it is in the phone system programming "call forward no answer"

if you want to know where this is you will need to give us the type of system and vmail you are using

_____________________________________
S.H.A.D.O.
_____________________________________

mike

 

[NortelGuy1979]

I'll assume since you posted this in the CP forum that you're using a Nortel Meridian 1 / CS1000; the prompt on the TN is "RCO"

Your options are 0, 1, and 2. The number of rings is defined in the customer data block, LD 15/21. RDR_DATA is the gate opener.

-Matthew

Matthew - Technical Support Engineer

 

[parkgroup]

Just a Call Pilot on a BCM 50

So don't know it it common to Call Pilot or BCM50 or both

 

[fireeater]

in element manager go to active dn's
under capabilities for the dn in question
look for call forward
forward it to the dn you get when you do f985

_____________________________________
S.H.A.D.O.
_____________________________________

mike