Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Where are the VB Controls?
- Thread starter RollyS
- Start date
This may be way off the mark, but are you trying to use something that is not included with XP?
The following is from Lockergnome tips.
10th December 2001
Kodak did a wonderful job on their Imaging Application (which comes bundled with Windows 98 and Windows 2000). As I archived more and more black and white documents, I came to appreciate its power. Sadly, this utility does not exist in Windows XP. There's no KODAKIMG.EXE or KODAKPRV.EXE to be found! My heartfelt thanks goes out to Lockergnomaniac John Hunter, who found a solution for those of us who miss our dear old app. We agree that the new "Windows Picture and Fax Viewer" sucks. If you have a Windows 2000 CD, copy the following files from the disc: OCKODAK.DLL, OIENG400.DLL, OIPRT400.DLL, OISLB400.DLL, OISSQ400.DLL, OITWA400.DLL, OIUI400.DLL, IMGCMN.DLL, IMGADMIN.OCX, IMGEDIT.OCX, IMGSCAN.OCX, and IMGTHUMB.OCX. Note that these files may still be compressed in the "**_" format.
You will need to use either the EXPAND.EXE utility or WinZip to uncompress them. If you have a Windows 98 CD, copy those same files PLUS the following: OIADM400.DLL, OICOM400.DLL, OIDIS400.DLL, OIFIL400.DLL, OIGFS400.DLL, IMGSHL.DLL, and IMGOCXD.HLP. In both cases, you should place all of them inside your System32 folder. Now, it's time to register the OCX files. Tap Winkey+R to launch the Run applet and then enter: "regsvr32 imgadmin.ocx" (sans quotes). Do the same for imgedit.ocx, imgscan.ocx, and imgthumb.ocx. Remember, to unregister an ActiveX control, you only need to trail regsvr32 with the "/u" switch. Be sure you've copied over the aforementioned executables to your System32 folder. They should work now! NOTE: You may need to launch the Kodak program to see if there are any other files missing from this procedure.
The following is from Lockergnome tips.
10th December 2001
Kodak did a wonderful job on their Imaging Application (which comes bundled with Windows 98 and Windows 2000). As I archived more and more black and white documents, I came to appreciate its power. Sadly, this utility does not exist in Windows XP. There's no KODAKIMG.EXE or KODAKPRV.EXE to be found! My heartfelt thanks goes out to Lockergnomaniac John Hunter, who found a solution for those of us who miss our dear old app. We agree that the new "Windows Picture and Fax Viewer" sucks. If you have a Windows 2000 CD, copy the following files from the disc: OCKODAK.DLL, OIENG400.DLL, OIPRT400.DLL, OISLB400.DLL, OISSQ400.DLL, OITWA400.DLL, OIUI400.DLL, IMGCMN.DLL, IMGADMIN.OCX, IMGEDIT.OCX, IMGSCAN.OCX, and IMGTHUMB.OCX. Note that these files may still be compressed in the "**_" format.
You will need to use either the EXPAND.EXE utility or WinZip to uncompress them. If you have a Windows 98 CD, copy those same files PLUS the following: OIADM400.DLL, OICOM400.DLL, OIDIS400.DLL, OIFIL400.DLL, OIGFS400.DLL, IMGSHL.DLL, and IMGOCXD.HLP. In both cases, you should place all of them inside your System32 folder. Now, it's time to register the OCX files. Tap Winkey+R to launch the Run applet and then enter: "regsvr32 imgadmin.ocx" (sans quotes). Do the same for imgedit.ocx, imgscan.ocx, and imgthumb.ocx. Remember, to unregister an ActiveX control, you only need to trail regsvr32 with the "/u" switch. Be sure you've copied over the aforementioned executables to your System32 folder. They should work now! NOTE: You may need to launch the Kodak program to see if there are any other files missing from this procedure.
- Status
Similar threads
- Locked
- Question
- Locked
- Question