Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

When replacing 7942 with an 8811...

Status
Not open for further replies.
skim6225

skim6225

MIS
Sep 11, 2012
131
US
...is this as simple as deleting the 7942 then adding the 8811? Sorry for the newbie question ;-). What makes me ask is the 7942's protocol is SCCP were the 8811 is SIP. I suspect it's not a quick easy delete/rebuild. Thx!
 
Sort by date Sort by votes
Just a matter of programming the 8811 with the correct settings and DN's.

Certifications:
A+
Network+
CCENT
CCNA Voice
TVOICE
CAPPS
CIPTV1
CIPTV2
 
Upvote 0 Downvote
Sounds about right. It registered and is functioning 100% per the end-user. Thx!
 
Upvote 0 Downvote
It seems like you already got it up and running but it can be tricky depending on what your running. If you are running older CME (10.5 for example) then it is tricky as you have to configure it in fast track mode. It is more trial and error like that then anything else but still doable.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Gnjiro
  • Locked
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
416
thepfy
thepfy
wolf8963
  • Locked
  • Question
Grandstream HT841 with call manager
Replies
3
Views
395
wolf8963
wolf8963
jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
178
jarod_paris
jarod_paris
Ruben A. Freitas
  • Locked
  • Question
system is operating with an insufficient number of licenses
Replies
5
Views
479
thepfy
thepfy
keyset6
  • Locked
  • Question
Cisco Unity delay after Caller Input selection with Call Handler
Replies
1
Views
282
keyset6
keyset6

Part and Inventory Search

Sponsor

Back
Top