Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

when i put sudip:dir=3725; t

Status
Not open for further replies.

afee2168

Technical User
Jul 25, 2016
1
KW
when i put

sudip:dir=3725;

the system hangs and finally comes as command lost.

if i do

ksexe:dir=3725;
sure?(yes/no)
<y
WAIT
WAIT
COMMAND LOST

if i try to remove it shows no removal allowed

i cannot see this number in MD110
 
What´s the printout command?

susip:dir=3725;

LINE is FREE or BUSY?

Br///
Fernando.
 
You seem to have a data corruption, not depending of busy or free or something...
 
Fcpli is right. Command lost print is most often associated with data corruption causing a lost signal to break the sequence.
To narrow it down, enter command HIREI;
follow this with sudip:dir=3725; wait for the command to time out, then print lost signals withy HIMDP;

this will give an indication as to where the corruption is.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top