Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What's your experience?: Installing IPO from scratch new sites

Status
Not open for further replies.

eaglepromopro

Systems Engineer
Feb 25, 2023
17
US
Installing Nortel's for about 20 years and it seems that they had pretty much everything figures out for a simple install. 66 Blocks and then the rest went into the wall mounted cabinsts.

I know the two are different but it seems each time I install an IPO every installs requires me to come up with a creative way to mount all the modules, cables runs, external power supplies, grounding etc.

I do like the IPO over the Nortel for its features and functions however I am wondering if any one has had these issues or have come up with a standard install protocol for the IPO.

thanks
 
I would say it’s no different..than installing nortel BCM etc
If the new site is all cat 5/6 cables in new cabs then it’s straight forward patch leads.
If wall mounted then you can get a cable harness with cat 5 ends on one side and terminate the other on 66 blocks or patch strips for small cabs,
.

I suppose we are all in the same situation..
Access each site as it comes..[atom]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top