What is the minimum requirement to setup an IP set? 1

[curlycord]

I am going to setup a lab BCM50 R6 for somebody and want to make it as easy as possible for them to test IP sets.

My thoughts are

BCM:
LAN Interface- static IP
DHCP- Enabled IP phones only
DHCP- S1 proxy server - same static IP as the Lan Interface (BCM's IP)

Sets:
Set DHCP to ON
Set the S1 server to the static IP of the Lan Interface (BCM's IP)
Apply and Reset

Any other suggestions?





________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[allworxguy]

Reset not required it will do that when hit apply.

Don't forget S1 port = 7000

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990