Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
What is the correct pinout on the m12x0
- Thread starter smcarroll
- Start date
From the FAQ section of this forum:Amphenol Trunk Module
Connector LS DS CI Card
Pair Color Port Line/Connection
1 Wh/Bl X01 slot 1 line 1/module line 1
2 Wh/Or X02 slot 1 line 2/Module line 2
3 Wh/Gn --- ---
4 Wh/Br --- ---
5 Wh/Sl X03 slot 1 line 3/Module line 3
6 Rd/Bl X04 slot 1 line 4/Module line 4
7 Rd/Or --- ---
8 Rd/Gn --- ---
9 Rd/Br X05 slot 2 line 1/module line 5
10 Rd/Sl X06 slot 2 line 2/Module line 6
11 Bk/Bl --- ---
12 Bk/Or --- ---
13 Bk/Gn X07 slot 2 line 3/Module line 7
14 Bk/Br X08 slot 2 line 4/Module line 8
15 Bk/Sl --- ---
16 Yl/Bl --- ---
17 Yl/Or X09 slot 3 line 1/module line 9
18 Yl/Gn X10 slot 3 line 2/Module line 10
19 Yl/Br --- ---
20 Yl/Sl --- ---
21 Vi/Bl X11 slot 3 line 3/Module line 11
22 Vi/Or X12 slot 3 line 4/Module line 12
23 Vi/Gn --- ---
24 Vi/Br --- ---
25 Vi/Sl --- Emergency Telephone
Connector LS DS CI Card
Pair Color Port Line/Connection
1 Wh/Bl X01 slot 1 line 1/module line 1
2 Wh/Or X02 slot 1 line 2/Module line 2
3 Wh/Gn --- ---
4 Wh/Br --- ---
5 Wh/Sl X03 slot 1 line 3/Module line 3
6 Rd/Bl X04 slot 1 line 4/Module line 4
7 Rd/Or --- ---
8 Rd/Gn --- ---
9 Rd/Br X05 slot 2 line 1/module line 5
10 Rd/Sl X06 slot 2 line 2/Module line 6
11 Bk/Bl --- ---
12 Bk/Or --- ---
13 Bk/Gn X07 slot 2 line 3/Module line 7
14 Bk/Br X08 slot 2 line 4/Module line 8
15 Bk/Sl --- ---
16 Yl/Bl --- ---
17 Yl/Or X09 slot 3 line 1/module line 9
18 Yl/Gn X10 slot 3 line 2/Module line 10
19 Yl/Br --- ---
20 Yl/Sl --- ---
21 Vi/Bl X11 slot 3 line 3/Module line 11
22 Vi/Or X12 slot 3 line 4/Module line 12
23 Vi/Gn --- ---
24 Vi/Br --- ---
25 Vi/Sl --- Emergency Telephone
- Thread starter
- #3
Thank you. I guess I should have phrased the question a little differently.
I've maxed out the line capacity on the 0x32 and am adding an additional 12 lines.
Once I add the lines into the m12x0 will the 0x32 automatically use these lines once I set the phones to do so? Basically giving me no further pinout or does the addition of these lines create the need to do additional pinout or change it?
I've maxed out the line capacity on the 0x32 and am adding an additional 12 lines.
Once I add the lines into the m12x0 will the 0x32 automatically use these lines once I set the phones to do so? Basically giving me no further pinout or does the addition of these lines create the need to do additional pinout or change it?
sprucegrover
Technical User
You will have to add the Trunk Module using a 2 or 6 port expansion card, inserted in the MICS when powered down.
Add the fibre connector to the top connector on the card ( Module 4 or 8 depending on the card)
Power up both and you will have an additional 4-12 trunks.
Configure the LS/DS card for trunks 49-52 and put them in a pool, give the sets access to the pool, and your home.
Add the fibre connector to the top connector on the card ( Module 4 or 8 depending on the card)
Power up both and you will have an additional 4-12 trunks.
Configure the LS/DS card for trunks 49-52 and put them in a pool, give the sets access to the pool, and your home.
- Thread starter
- #5
if all the lines are in teh same group, just copy the settings of the lines in the 0 X 32 ...that'll include the pool settings
if you need the pool to be different, it is under line programming/ trunkline data
line 49 onwards for uptoMICS 5.0 software
if you need the pool to be different, it is under line programming/ trunkline data
line 49 onwards for uptoMICS 5.0 software
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question