What is the capacity of a 0x32 switch?

[cdelwood]

How many sets does it support?

 

[senk1s]

32 on the main unit - and if you use ALL station modules (with Rel7 XC), that'll give an additional 12 X 16

 

[cdelwood]

I have many locations with 0x32 with 12x0 addons, but I have never seen just a 0x32 with no addons.

So, I can have 16 stations, right? But no analog stations?

 

[bwtc]

You can have 32 stations on the main module.

You can have 16 on each expansion.

You can have 1 analog extension on the main module / station module per ATA.

You can have 8 analog extensions on an ASM.

 

[silver987]

If you add an Analog Station Module you can have 8 analog lines. Or you can add one at a time with an Analog addapter. The ASM can piggyback for 8 more analog lines for a total of 16 on one expansion port.
The 0x32 is capable of 12 additional expansion units.

http://www.silverlakecom.com

 

[cdelwood]

Thanks guys! Just to be clear, an 0x32 can support 32 stations. Got it. Is the 12x0 module on some of my switches for analog stations?

 

[bwtc]

The 12x0 is an expansion unit, which can store up to 3 copper line cards, giving you 12 more copper (telco) lines

 

[norstarboy125]

First off in a 12x0 you can have ds cards- clid cards- did cards- and in certain setups dtm cards your not restricted to copper trunks in youe 12x0 trunk mod. You can also have a 0x32 with no mods. attached I have installed 100's like that, also someone correct me if i'm wrong but you can only add 10 mods. 3 through 12 and 13&14 are reserved for Companion.

 

[silver987]

Release 7.0 made the last two ports available.

http://www.silverlakecom.com

 

[norstarboy125]

Thanks for the info silver987