Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
What is Phaser 840 fault 08,001.44 ?
- Thread starter acq
- Start date
Smaug1Tech
Vendor
8,000 ERRORS ARE THE CAP\WIPE\PURGE ASSY. Drive.
Check the belts, the clutch, and flag movement on the right belt. You can manually rotate the drive clutch to see if the assy. is jammed. if not, then also check the sensor PCB on the lower front of unit.
Check the belts, the clutch, and flag movement on the right belt. You can manually rotate the drive clutch to see if the assy. is jammed. if not, then also check the sensor PCB on the lower front of unit.
- Status
Similar threads
- Locked
- Question
- Locked
- Question