Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
What is a "link range" error in Paradox 3.5???
- Thread starter bill2000
- Start date
bill2000,
Corel's KnowlegeBase ( is a good place to look for the old Paradox/DOS documents that Borland's Tech Support team used to have available.
Case in point, searching that page for "link range error" turned up a document ( that outlines three possible causes and their solutions, each appropriate for different situations. One of them should help resolve the issue.
Hope this helps...
-- Lance
P.S. Obscure Factoid: This is a case where "no good deed goes unpunished as that particular document is one I helped write during my early days in Paradox Tech Support. Yikes.
Corel's KnowlegeBase ( is a good place to look for the old Paradox/DOS documents that Borland's Tech Support team used to have available.
Case in point, searching that page for "link range error" turned up a document ( that outlines three possible causes and their solutions, each appropriate for different situations. One of them should help resolve the issue.
Hope this helps...
-- Lance
P.S. Obscure Factoid: This is a case where "no good deed goes unpunished as that particular document is one I helped write during my early days in Paradox Tech Support. Yikes.
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question