Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What hardware do I need to connect two ethernet ready devices wireless

Status
Not open for further replies.

davidd31415

Programmer
Jan 25, 2006
154
US
No internet involved here.

I currently have a computer connected to two motor controllers via a switch. I'd like to eliminate the ethernet cable. The computer IP address is currently assigned, not provided with DHCP.

Is this enough information to specify the hardware that would be required to connect these devices wirelessly?

Thanks

David
 
Assuming your two 'motor controllers' are connected to your switch via ethernet cable...

You would need to get your self a wireless router with a 4 port switch to plug the motor controllers into and then a Wireless PCI card to install in the PC. This would eliminate the 'ethernet' connection between the PC and the Controllers.

I think this is what you are trying to achieve. Post back if yo need more info.

I used to have a handle on life... but it broke. Cpt. Red Bull
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top