What extensions can I program from?

[dwaxman]

We've recently expanded the number of lines and our old display phone which we did our programming from is no longer the switchboard phone at station 10. What other station can I plug that phone into to do system programming?

 

[ttech]

What model Merlin is it?
You can put a display phone in 10 and remove it when you care done

 

[Pepperz]

You can only program from the 1 port that is administered to allow programming, default is logical id #1

Pepperzgm at gmail dotte comm

 

[tdaugirdas]

You can change the system programming port to any of the first 5 ports on the first MLX module in the system (assuming you have a Legend system. You do this through system programming: menu, system programming, start, system, SProg Port, backpspace out the default extension# and enter the new extension#, press enter, exit out.

Tom Daugirdas,
President
STCG, Inc.
stcg.com

 

[ttech]

Could be a 1030/3070 or a merlin 2 then it Has to be ext 10. He never did say whay system he has.

Probably a legend though.