Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What does the results code mean for Test station command?

Status
Not open for further replies.

KeithMGOA

Technical User
Oct 19, 2009
41
CA
Hi

I am looking for what the error codes mean for the test station command for ASA 5.

What I am trying to do is determine if a station is active. There is another group helps manage the phones and they have a habit of just unplugging a phone with out TTI.

Here is what I have been able to determine so far. If the station has a phone is attached the Results will say pass. If station has been TTI the result will say no hardware assigned.

If the phone has been removed but the station not TTI the results are not consistent. Here are some examples
Test No. 1372 Result FAIL Error Code 3
Test No. 1373 Result ABBORT Error Code 1706
Test No. 16 ABBORT Error Code 3.

I have not found any documentation on what error codes means. (Documents; 100089357 and 100089286 talks about the test station command but not the results or error codes.) Would anyone have a suggestion on where I can find this information?

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top