Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What do I need to set up to utilize virtual office with cs1000 w/ 4.5.

Status
Not open for further replies.

hunter462003

Technical User
Aug 7, 2008
38
US
Can anyone tell me what must be configured for me to start using Virtual Office? We use i2002 and i2004 phones. Thanks in advance.
 
I have the same setup and we are using the Application Gateway to control licensing and Virtual office. Licenses per IP(TN) are needed.(for some reason the AppGateway uses the IP of phones to distribute permissions)
 
good place to start:



Nortel Communication Server 1000 Release 4.5
Document Number: 553-3001-306

IP Network-wide Virtual Office
Features and Services Book 3 of 3 (N to Z)

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
 
Oops Typo... here is the corrected info:


Book 2 of 3 (D to M)
Page 691

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
 
Thanks Triton101. I have been reviewing that section and it appears that I need to define SCPL in LD 15, as it is set to 0. See below.
REQ: prt
TYPE: ffc
TYPE FFC_DATA
CUST 0

TYPE FFC_DATA
CUST 00
CCRS UNR
SCPL 0
FFCS NO
STRL 0
STRG
ADLD 0

Once I set SCPL and assign a password to the associated TN, and allow VOLA and VOUA, is that all I need to do? I use TM to make these changes. I understand I need to do a datadump and a sysload. Never having done a sysload I'm unsure of what to expect. But I guess it is required as I am changing the password length. We do have packages 382 and 387.
I should have said in the begining that we are using a CS1000 with 4.5 code with two BMGs. I'm assuming that if I want Network wide VO capability I need to make the same changes for those sites.
Any assistance is greatly appreciated.
 
here is some more info about licenses you will have to keep in mind as well.



in 5.x IP Network wide virtual office works with NRS(with connection server, or some such name) not sure with 4.5

locally, you will need station control passwords and the CLS for the phones

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
 
Thanks all I have it working. After changing the SCPL and doing a datadump (sysload wasn't required).

REQ: prt
TYPE: ffc
TYPE FFC_DATA
CUST 0

TYPE FFC_DATA
CUST 00
CCRS UNR
SCPL 4
SBUP YES
FFCS NO
STRL 0
STRG
ADLD 0
DFLT_SCPW NO

 
Yup. only needed if you change it once it's set... sorry did not see that you were asking if sysload was required.....
good stuff you got it going...

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top