Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
what Common control and other Card beside IP-PAD to Install and use DT 700 ip Phones on SV8500
- Thread starter WildBil
- Start date
belevedere
Instructor
If you have no IP phones currently, then you will need some programming.
SP-PHD is a type of PHD accommodated in MPH. SP-PHD enables the operation of IP terminal (IP Multiple
Line terminal), SIP Multiple Line terminal, Soft Phone, and Digital terminal accommodated in UG50
or IPG Digital.
MPH is an interface built-in the Telephony Server’s SP which is used to connect TP and SP. MPH also has a
function to control and monitor SP-PHD and SP-PHI.
This is not something an end user should attempt to do especially with Fusion.
SP-PHD is required for this feature.
Note: SP-PHD handles the Control Signals sent to and from IP Enabled Dterm. SP-PHD can
handle a maximum of 4000 IP Enabled Dterms. For more detailed information on PH,
refer to the Protocol Handler Reference Note.
SP-PHD is a type of PHD accommodated in MPH. SP-PHD enables the operation of IP terminal (IP Multiple
Line terminal), SIP Multiple Line terminal, Soft Phone, and Digital terminal accommodated in UG50
or IPG Digital.
MPH is an interface built-in the Telephony Server’s SP which is used to connect TP and SP. MPH also has a
function to control and monitor SP-PHD and SP-PHI.
This is not something an end user should attempt to do especially with Fusion.
SP-PHD is required for this feature.
Note: SP-PHD handles the Control Signals sent to and from IP Enabled Dterm. SP-PHD can
handle a maximum of 4000 IP Enabled Dterms. For more detailed information on PH,
refer to the Protocol Handler Reference Note.
- Status
Similar threads