What cls do you use .

[GARREN]

Want to know what cls do you use to keep. A digital phone from disabling during nightly maintenance. Of course when it has been unplugged. Meridian 2008 2616 phones.

 

[wdhb]

you need to remove 30 from the DROL prompt, in LD17. this means that when your system runs its midnight routines it wont test any set

TYPE ovly
OVLY
SID 2805
BKGD 044 045
PBXH 03
TODR 00
DROL 030 034 038 043 044 045 135
CY45 03
MULTI_USER ON

 

[unkalary]

To remove the 30 from the DROL prompt just type "x30" and this will remove the LD 30 from Midnights.That is what is disabling your digital sets when unplug at when midnights are run. DROL means Daily Routines

 

[GARREN]

thanks worked.

 

[jimeec]

I don't know what type of switch you have but just an FYI-- if you remove LD30 from the midnight routines your clock controllers will not swap and you will always run on the same clock controller.LD 30 runs several tests not just for disabled sets.

 

[GARREN]

10-4 I figured out I can control indivual sets. By changing cls flxd to flxa. Then the indivual set will not disable when unplugged. Thanks.

 

[wdhb]

does flxa work for taurus sets as well as aries sets