What CDE settings could I change?

[Color]

We currently have AIX 4.3.2 installed and one ASCII terminal attached as our console. The following messages are always coming out, almost every three seconds:<br><br>***********************************<br>Resuming Desktop Login......<br>***********************************<br><br>***********************************<br>Suspending Desktop Login...<br>Press [Enter] key for a login prompt.<br>Log in. Desktop Login will resume shortly after you log out.<br>***********************************<br><br>I think the system is treating this terminal as a graphic display. <br>How could I throw these up? There must be some settings for CDE environment.<br>Any help would be appreciated.

 

[ElgisRamon]

Hello, at <b>smit system</b> you can set your &quot;default user environment&quot;. Set it to <b>command line login</b> to set AIX to not to load CDE by default.<br><br>I hope it works...

 

[Color]

Thanks ElgisRamon.<br>But I don't want to change the interface to &quot;command line&quot; as we still need to have dt running. We can not use Exceed CDE session to log on if setting interface to command line.<br><br>Any other ideas?

 

[baderoor]

look in your /etc/inittab file and see how your systems is started up regarding console hope that helps you in some way

 

[carine]

You have to stop the dtsrc daemon by tape this commande :<br>stopsrc -s dtsrc

 

[canes]

I have the same problem.&nbsp;&nbsp;We need to allow an LFT console run command line or CDE and have Exceed provide CDE capability PC's connected via serial cable.<br><br>We have tried the two suggestions above and they are not the answer.&nbsp;&nbsp;If you are able to solve this problem, please let me know.&nbsp;&nbsp;I will do the same.<br><br>Thanks <p>Doug Tyre<br><a href=mailto: > </a><br><a href=

http://www.miami.edu/UMH/CDA/UMH_Main/1,1770,3005-1,00.html>NGJ

Information Systems Institute (at UM)</a><br>