What cards are supported in the UCx 450

[eyezen]

I'm interested in having internal FXO/FXS ports inside of an UCx 450 instead of having external gateways - our vendor is stating that only a PRI card is supported.

Not that I don't believe them - however being the open platform that it's supposed to be doesn't lend itself to that conclusion nor does the info on their website.

http://emetrotel.com/ucx-cards

Any info is appreciated.

 

[ucxguy]

You can install an FXO card in UCx450 and it will work without problems. Considering that the typical number of extensions on UCx450 is certainly over 50, the use of a PRI card in UCx450 is much more common. Also, analog trunks are really a technology from the past - you should consider IP trunks instead (if possible).

As far as I know, FXS ports are not supported.

 

[eyezen]

The FXO ports would be for 911/failover

 

[Echelon1969]

I was told sometime ago that the UCx450 didn't support internal FXO cards. Has this changed ?

Echelon1969
Advanced Teletronics Limited
954-874-9081

 

[getsomesun1]

The UCx 450 will accept FXO cards. You can also use a FXO gateway. WE do it for the same reason. Failover for the SIP Trunks.