Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
what can be done to correct error c
- Thread starter vincejrf
- Start date
EDD0101
Dynamic memory request has failed; there is not enough Unprotected data
space available to buffer the Patch data. The Patch buffer requires 383
words--the Patches have not been saved.
Increase your Unprotected memory size via Service Change and perform
Data Dump.
Severity: Critical
You can try going to 143 and doing a edd clr but that's not likely to help much. To clear the UDATA you usually have to do an ini.
Dynamic memory request has failed; there is not enough Unprotected data
space available to buffer the Patch data. The Patch buffer requires 383
words--the Patches have not been saved.
Increase your Unprotected memory size via Service Change and perform
Data Dump.
Severity: Critical
You can try going to 143 and doing a edd clr but that's not likely to help much. To clear the UDATA you usually have to do an ini.
Firebird Scrambler
Systems Engineer
What is your system version and software release?. I seem to recall that some P data can be cleared by going into LD 1 and running the option to check the templates.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question