I have a definity G3r V111 a TN464F Circuit pack with 120a3 CSU. I created a Tie Trunk group as specified by the BrookTrout support. This Tie Trunk will serve as a T1 to this BrookTrout card which has been installed into a fax server.
Here is a diagram:
<->PBX--TN464F--CSU--CABLE--BROOKTROUT T1034--FAX SERVER<->
I have been questioning the cable. I've tried both straight and crossed. But i'm still unsure.
When I status the trunk group it tells me my members are active and ready.
I've double checked the trunk and DS1 settings.
I've tried three differnt TN464f cards and two CSUs.
How can I prove what is working and what is not?
Any and all help will be greatly appreciated.
Attitude is everthing.
-Snapper
Here is a diagram:
<->PBX--TN464F--CSU--CABLE--BROOKTROUT T1034--FAX SERVER<->
I have been questioning the cable. I've tried both straight and crossed. But i'm still unsure.
When I status the trunk group it tells me my members are active and ready.
I've double checked the trunk and DS1 settings.
I've tried three differnt TN464f cards and two CSUs.
How can I prove what is working and what is not?
Any and all help will be greatly appreciated.
Attitude is everthing.
-Snapper
