WebVPN Not Working

[FloDiggs]

I'm having some trouble getting the WebVPN to come up on a 5520. The ASA also serves as our corporate firewall. I don't even get the login page, the connection just times out. I have a 5505 that I used to do some testing, and the only thing I had to do to get the WebVPN to come up was to enter the WebVPN config mode and type "enable outside". It got me started doing what I needed to do, but when i tried to do the same on the production ASA, it's not working. The only difference other than the model number is that the production ASA has some alias IPs configured through static translations. What am I missing?

 

[Supergrrover]

Did you create your cert?

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9ff.shtml

Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[FloDiggs]

It should use the same cert as it does for SSH and the ASDM, correct? If that is the case, then yes. If i need to create a separate one, I'll have to do that. Eventually I'll be importing one from VeriSign, but it is currently assigned to our VPN3000.

 

[FloDiggs]

My stupid ISP was blocking 443 on my IP. Why? They don't have a good answer. It's amazing how well the WebVPN works when a third party isn't blocking the ports you need. Thanks for the help Grover.

 

[Supergrrover]

Haha, yes.

ISP Blocking 443?!?!

Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[FloDiggs]

Yeah, don't get me started. Apparently, we've requested more than once for them to filtering our subnet, but that was before my time here. It's not your standard ISP, but that is beside the point. I felt dumb calling and asking them to look at it, but I had exhausted all other possibilities.