Web Connector Configuration?

[TCavins]

I am having trouble getting the web connector to work properly between the web server and the application server where the reports are located.

I have configured the Web Connector like this:
The virtual path of the web server is E:\Reports and the Actual Path on the application server is C:\Reports. The extension is .rpt.

When I run a report I get the following error: "File e:\Reports\ReportName.rpt not found. [On Page Server: ApplicationServerName.pageserver]

Since it is looking on the application server, I believe the web connector is communicating between the web server and the application server. I am not sure why it is looking in E:\Reports since the Application server doesn't even have an E:\ drive.

Any help would be greatly appreciated.

-Tim

 

[synapsevampire]

If I understand your problem correctly, don't use a drive letter, use the machine name in place of it.

-k

http://www.informeddatadecisions.com

kai@informeddatadecisions.com

 

[SteveRemington]

I think you problem lies with the value that you entered for the virtual path. The "Virtual Path" value is the directory seen by the web server NOT the real directory on the hard drive. For example, the virtual path should be entered as "/reports" and the actual path in "C:\Reports".

Try that and see how you go.