Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

weak ringing on analog ports that are part of calling group

Status
Not open for further replies.

jgreen17

Technical User
Jan 15, 2008
61
US
when a call is transferred into calling group with analog stations(016 T/R) I have weak ringing on the analog stations and the gateway that the analogs are plugged into doesn't always recognize the call ringing in. Sometimes it is ok sometimes not . The calls are mostly transferred to the calling group from voicemail. The calling group is setup as linear.
 
You might try setting up the analog stations as Fax Machines under Aux Equip, which will change the ring pattern from double to a longer single ring.
 
Also depending upon the analog sets you are using it could be the sets themselves. Some of those older sets required more power than the Legend could provide properly.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top